Tips On How To Thread A Sewing Machine

Threading a sewing machine isn’t the simplest of tasks though in the event your machine has one of these handy automated threading systems, it’s a breeze. However, regardless of whether it does, it never hurts to be familiar with methods to do it by hand just in case.

The bobbin

The first step will be to wind the bobbin. To do this, you have to disengage the needle and on many machines, this is accomplished using the hand-wheel on the side. This will get the needle out of the way as you wind the bobbin. The bobbin is a small spool underneath the sewing machine needle and this supplies the underside element of the stitch the machine creates. It doesn’t come along with thread on it therefore you must remove it from its compartment.

The spool of thread you will use goes on a small spool pin at the top of your machine. Add the reel of thread on it in order that it releases counter-clockwise. You then guide the thread round the bobbin winding tension disc, that is near the top of the machine but on the opposite end to the spool.

Once you have finished this, wind the thread around your bobbin a few times to secure it. The bobbin is then put on another small pin that is usually close to the spool pin, so the thread is forming a V-shape. The bobbin locks into place here.

Your machine will show you how to work the bobbin threader precisely but usually pressing the floor pedal or the bobbin winding button accomplishes this. Once the thread is secure on the bobbin, cut it off leaving a trailing length.

Threading The Machine

Once you have prepared your bobbin, you're ready to thread the sewing machine. Re-engage the needle to ensure the machine is ready to go. Replace the bobbin within the compartment within the machine, keeping your hands on the additional length you left loose. Different machines will likely have different set ups, but general, a small cut-out is visible higher than the bobbin and then the thread passes through this. The bobbin should spin counter-clockwise.

Winding the thread will be the next stage which involves pulling the thread from the spool at the top of your machine through the thread guide, also towards the top. This can be a small silver component of metal that sticks out from the main body. Follow the arrows or instructions looping it round the tension discs at the bottom then up to a second thread guide. This forms an extended u-shape with the top thread.

After making the u-shape, you will wind the thread around a level at the top then down again to the needle. There is a little area towards the top of the needle for the thread to go through. You then thread the needle like every ordinary needle, through the hole at the bottom. This should result in the thread being pulled through the presser foot towards the bottom. This now adds to the thread from the bobbin below and the machine is ready to create stitches.

Conclusion

Each machine may have marginally different size and shapes with the components involved and may call items by different names. However, every machine will have a guide in it that can supply the exact procedure for threading the needle for that specific model. Some providers even publish online guides specific to every single style of machine so that it is simple to master this task. Furthermore, like anything, the more often you do it, the more natural it becomes. In no time at all, you’ll be threading your machine like a tailor.

When you have almost any questions with regards to where and also the way to work with SewingMonster.com, you'll be able to e mail us from our web-site.